Komatsu ECU / ECM Supplier South Africa
Komatsu ECU, ECM & Electronic Controllers for Heavy Equipment
Looking for a Komatsu ECU, Komatsu ECM, Komatsu excavator ECU or Komatsu controller in South Africa? Yellow Plant Parts Online supplies and sources electronic control modules for Komatsu construction, mining and earthmoving equipment.
We assist customers looking for Komatsu ECU South Africa, Komatsu ECM South Africa, Komatsu engine ECU, Komatsu engine ECM, Komatsu electronic control modules, Komatsu machine controllers, hydraulic controllers and transmission control units.
Our sourcing network covers controllers for excavators, wheel loaders, bulldozers, dump trucks, motor graders and other Komatsu heavy equipment.
Depending on availability, we can source genuine OEM, new aftermarket, used, tested, repaired, reconditioned and remanufactured Komatsu ECU/ECM units.
If your machine is down because of a failed controller, send us the Komatsu model, serial number, ECU/ECM part number and photographs of the controller label and connectors. We can investigate the correct replacement or alternative sourcing option.
Komatsu ECU & ECM Parts Supplier
A modern Komatsu machine relies on electronic control systems to manage critical functions such as engine operation, fuel injection, hydraulic control, transmission operation, monitoring and machine communication.
A faulty ECU or ECM can result in:
- Engine starting problems
- No-start conditions
- Reduced engine power
- Poor engine performance
- Warning lights
- Communication faults
- Sensor-related fault codes
- Hydraulic performance problems
- Transmission problems
- Intermittent machine shutdown
- Loss of machine functions
- Diagnostic communication errors
Yellow Plant Parts Online helps customers source replacement Komatsu electronic control modules for machines operating in construction, mining, quarrying, civil engineering and earthmoving applications.
What Is a Komatsu ECU?
An ECU (Electronic Control Unit) is an electronic controller responsible for processing information from sensors and controlling specific machine functions.
Depending on the machine, a Komatsu ECU may control or communicate with systems such as:
- Engine management
- Fuel injection
- Engine monitoring
- Hydraulic systems
- Transmission
- Machine functions
- Displays
- Communication networks
- Safety and protection systems
The terminology used in the industry can vary. Customers may refer to the same or related component as a Komatsu ECU, ECM, controller, computer, electronic module, control unit or machine computer.
What Is a Komatsu ECM?
ECM means Electronic Control Module or Engine Control Module, depending on the application.
A Komatsu ECM may be associated with engine management and can process information from sensors and other systems to control engine operation.
When searching for a replacement, customers commonly use terms such as:
- Komatsu ECM
- Komatsu engine ECM
- Komatsu engine control module
- Komatsu ECM controller
- Komatsu excavator ECM
- Komatsu diesel ECM
- Komatsu ECM replacement
- Komatsu ECM for sale
The exact controller required depends on the machine configuration, serial number, engine and controller part number.
Komatsu ECU / ECM Models We Support
We can source electronic controllers for a wide range of Komatsu machines.
Komatsu Excavator ECU / ECM
Popular Komatsu excavator models include:
- PC55
- PC78
- PC88
- PC100
- PC120
- PC130
- PC138
- PC150
- PC160
- PC180
- PC200
- PC210
- PC220
- PC228
- PC230
- PC240
- PC270
- PC290
- PC300
- PC350
- PC360
- PC390
- PC400
- PC450
- PC490
- PC500
- PC600
- PC650
- PC700
- PC750
- PC800
- PC850
- PC1250
The Komatsu PC200, PC210 and PC220 ranges are particularly common requirements when customers search for replacement excavator controllers.
Komatsu PC200 ECU / ECM
We can assist with sourcing Komatsu PC200 ECU and ECM controllers, including requirements for different PC200 generations and configurations.
Common searches include:
- Komatsu PC200 ECU
- Komatsu PC200 ECM
- PC200 ECU for sale
- PC200 ECM replacement
- PC200-6 ECU
- PC200-7 ECU
- PC200-8 ECU
- PC200-8 ECM
- PC200-8 controller
- PC200 electronic control module
- PC200 engine controller
For example, published parts references associate 7834-20-3000 with PC200-7 and 7834-21-5000 with PC200-8 in one compiled ECU reference.
However, do not order a controller based solely on the machine model. Komatsu itself warns that part numbers can differ by machine model and type and recommends proper part-number identification to avoid component mismatch.
Komatsu PC210 ECU / ECM
We can source controllers for Komatsu PC210 excavators, including different generations and configurations.
Common search terms include:
- Komatsu PC210 ECU
- Komatsu PC210 ECM
- PC210-7 ECU
- PC210-8 ECU
- PC210-8 ECM
- PC210-10 ECU
- PC210 electronic controller
- PC210 engine control module
- PC210 hydraulic controller
A controller listed for one PC210 configuration should not automatically be assumed to fit another machine. Always confirm the complete machine identification and controller number.
Komatsu PC220 ECU / ECM
We also assist with Komatsu PC220 ECU and ECM requirements.
Popular searches include:
- Komatsu PC220 ECU
- Komatsu PC220 ECM
- PC220-6 ECU
- PC220-7 ECU
- PC220-8 ECU
- PC220-8 ECM
- PC220 controller
- PC220 electronic control module
- PC220 engine ECU
One published reference associates 7834-21-6000 with the PC220-8, but controller identification must be confirmed against the specific machine before ordering.
Komatsu PC300, PC350 & PC360 ECU / ECM
We can also assist with electronic controllers for larger Komatsu excavators, including:
- PC300
- PC300-7
- PC300-8
- PC350
- PC350-7
- PC350-8
- PC360
- PC360-7
- PC360-8
- PC390
- PC400
- PC450
Search terms include:
Komatsu PC300 ECU, Komatsu PC300 ECM, PC300-8 ECU, Komatsu PC350 ECU, PC350 ECM, Komatsu PC360 ECU, PC390 ECU, PC400 ECU and PC450 ECU.
Published controller references include Komatsu ECU/ECM numbers such as 7834-24-2000 for PC300-8 and 7834-30-2000 for PC360-8 in a compiled reference.
Komatsu Wheel Loader ECU / ECM
Yellow Plant Parts Online can also source controllers for Komatsu wheel loaders.
Models include:
- WA150
- WA200
- WA250
- WA270
- WA320
- WA380
- WA420
- WA430
- WA470
- WA480
- WA500
- WA600
- WA700
- WA800
- WA900
Common searches include:
- Komatsu wheel loader ECU
- Komatsu wheel loader ECM
- Komatsu WA380 ECU
- Komatsu WA430 ECU
- Komatsu WA470 ECU
- Komatsu WA500 ECU
- Komatsu loader controller
- Komatsu wheel loader ECM replacement
Komatsu Bulldozer ECU / ECM
We source electronic controllers for Komatsu dozers, including:
- D39
- D51
- D61
- D65
- D85
- D155
- D275
- D375
- D475
Common searches include:
- Komatsu D65 ECU
- Komatsu D85 ECU
- Komatsu D155 ECU
- Komatsu dozer ECM
- Komatsu bulldozer ECU
- Komatsu bulldozer controller
- Komatsu engine ECM
Komatsu Dump Truck ECU / ECM
Electronic controllers are also available for selected Komatsu mining and articulated dump truck applications.
Examples include:
- HM300
- HM350
- HM400
- HM450
- HD series equipment
- Large mining equipment
Controller requirements vary substantially between machines, engines and configurations, so the serial number and controller identification are important.
Komatsu ECU / ECM Part Numbers
We can investigate a wide range of Komatsu ECU and ECM part numbers.
Examples found in published heavy-equipment ECU references include:
| Komatsu ECU / ECM Part Number | Description |
|---|---|
| 7834-20-3000 | Engine ECU |
| 7834-21-5000 | Engine ECU |
| 7834-21-6000 | Engine ECU |
| 7834-24-2000 | Engine ECU |
| 7834-30-2000 | Engine ECU |
| 7834-40-2000 | Engine ECU |
| 600-461-1100 | Engine ECM |
| 600-463-1670 | Engine ECM |
| 600-463-1601 | Engine ECM |
| 600-465-1100 | Engine ECM |
| 600-467-1100 | Engine ECM |
| 600-467-1200 | Engine ECM |
| 600-467-1400 | Engine ECM |
| 600-467-1500 | Engine ECM |
| 600-467-1600 | Engine ECM |
| 7835-26-1009 | Electronic module / controller |
These numbers are provided as search and identification references, not a universal compatibility list. Published marketplace and parts references also show controllers such as 600-467-1100 / 4921776 being associated with PC200-8, PC210-8 and PC228US-8 applications.
A Komatsu controller must be verified against the exact machine configuration, serial number and existing controller before purchase.
Komatsu ECM 7835-26-1009
One commonly searched Komatsu controller is 7835-26-1009.
Customers may search for:
- Komatsu 7835-26-1009
- 7835-26-1009 ECU
- 7835-26-1009 ECM
- 7835-26-1009 controller
- Komatsu electronic module 7835-26-1009
We can investigate availability of this and other Komatsu controller part numbers, including new, used and reconditioned options where available.
Komatsu ECU 600-467-1100
Another controller number frequently encountered in Komatsu ECU searches is:
600-467-1100
Related search terms include:
- Komatsu 600-467-1100
- 600-467-1100 ECU
- 600-467-1100 ECM
- 600-467-1100 controller
- Komatsu PC200-8 ECM
- Komatsu PC210-8 ECM
Some published supplier references associate this controller number with PC200-8, PC210-8 and PC228US-8 applications.
Always confirm compatibility before ordering.
Types of Komatsu Electronic Controllers We Supply
We don’t only source engine ECMs.
Depending on the machine, we can investigate:
Engine ECU / ECM
Controls or manages engine-related electronic functions.
Machine Controller
Controls communication and machine functions.
Hydraulic Controller
Associated with hydraulic control and pump management.
Transmission Controller
Controls electronic transmission functions where fitted.
Monitor Controller
Associated with machine display and monitoring systems.
Display / Instrument Controller
Controls or communicates with operator display systems.
Interface Modules
Electronic modules that allow different machine systems to communicate.
Pump Controllers
Controllers associated with electronically managed hydraulic pump systems.
Other Electronic Modules
We can investigate additional Komatsu control modules based on the machine and part number.
New, Used & Reconditioned Komatsu ECM / ECU
We understand that customers have different budgets and machine requirements.
Depending on availability, we can investigate:
Genuine OEM Komatsu
Original manufacturer equipment where available.
New Replacement
New replacement controllers from suitable suppliers.
Aftermarket
Alternative replacement controllers where appropriate.
Used / Tested
Pre-owned controllers for selected applications.
Reconditioned
Controllers that have undergone repair or restoration where available.
Remanufactured / Exchange
Remanufactured or exchange options for selected controller applications.
The availability, condition, programming requirements and warranty can vary by controller.
Komatsu ECU Programming & Compatibility
Replacing an ECU or ECM is not always simply a matter of connecting another box.
Depending on the machine and controller, requirements may include:
- Correct hardware version
- Correct software
- Machine configuration
- Engine configuration
- Serial-number compatibility
- Parameter configuration
- Calibration
- Programming
- Security or immobiliser-related procedures
- Diagnostic communication
For this reason, provide the original controller details before ordering.
How to Order a Komatsu ECU or ECM
For the fastest identification, send:
1. Machine Make
Komatsu
2. Machine Model
For example:
PC200-8
3. Machine Serial Number
The complete serial/PIN is extremely important.
4. Controller Part Number
Send every number printed on the controller label.
5. Controller Photograph
Take clear photographs of:
- Front
- Back
- Identification label
- Connectors
- Part-number plate
6. Engine Information
Where available, provide:
- Engine model
- Engine serial number
- Engine arrangement/specification
7. Quantity
Tell us how many controllers you require.
8. Delivery Location
Provide the city, province and country.
Why Choose Yellow Plant Parts Online for Komatsu ECU / ECM?
Wide Komatsu Coverage
We source controllers for excavators, loaders, dozers, dump trucks and other heavy equipment.
Multiple Options
We can investigate OEM, aftermarket, used and reconditioned options.
Hard-to-Find Controllers
We assist with obsolete and discontinued Komatsu electronic modules.
South African Supply
We support customers throughout South Africa and can investigate international sourcing where required.
Parts Identification Support
Send the machine and controller information and we can help identify the appropriate sourcing option.
Reduced Downtime
Our objective is to help customers find critical electronic components efficiently and get equipment back into operation.
Komatsu ECU / ECM South Africa
If you are searching for:
Komatsu ECU South Africa
Komatsu ECM South Africa
Komatsu ECU for sale South Africa
Komatsu ECM for sale South Africa
Komatsu excavator ECU South Africa
Komatsu PC200 ECU South Africa
Komatsu PC200-8 ECU South Africa
Komatsu PC210 ECU South Africa
Komatsu PC220 ECU South Africa
Komatsu controller South Africa
Yellow Plant Parts Online can assist with sourcing and identification.
We serve customers involved in:
- Mining
- Construction
- Earthmoving
- Civil engineering
- Quarrying
- Plant hire
- Equipment repair
- Machinery rebuilding
- Fleet maintenance
Komatsu ECU / ECM Supply Across Africa
We can also assist customers operating Komatsu equipment in:
- South Africa
- Botswana
- Namibia
- Zimbabwe
- Zambia
- Mozambique
- Malawi
- Tanzania
- Democratic Republic of Congo
- Angola
- Kenya
- Other African markets
Shipping options depend on the controller, supplier, destination and availability.
Tips When Buying a Komatsu ECU / ECM
TIP 1: Don’t order by machine model alone
A PC200 is not necessarily equipped with the same controller across every generation or serial-number range.
Komatsu’s own maintenance guidance specifically warns about component mismatch and recommends proper part-number identification.
TIP 2: Photograph the controller label
A clear photograph can reveal important information including:
- Part number
- Serial number
- Hardware number
- Manufacturer
- Software information
- Revision information
TIP 3: Send the machine serial number
This can help distinguish between different machine configurations.
TIP 4: Compare all controller numbers
Don’t rely on one number alone. Controllers can have multiple identification numbers or superseded numbers.
TIP 5: Check the connectors
The housing may look identical while the connector configuration or internal specification differs.
TIP 6: Don’t assume a used ECM is plug-and-play
A used controller may require programming, configuration, testing or other procedures depending on the application.
TIP 7: Diagnose the original failure
A controller failure may be caused by:
- Voltage problems
- Wiring faults
- Water ingress
- Poor grounding
- Short circuits
- Sensor faults
- CAN communication faults
- Battery/charging problems
Replacing the controller without diagnosing the root cause can result in another failure.
TIP 8: Keep the old controller
If possible, retain the original ECM/ECU. Its identification label and configuration information may be valuable when sourcing a replacement.
Frequently Asked Questions – Komatsu ECU & ECM
What is a Komatsu ECU?
A Komatsu ECU is an electronic control unit used to control or communicate with specific machine systems. Depending on the application, it may control engine, hydraulic, transmission or other machine functions.
What is a Komatsu ECM?
A Komatsu ECM is an electronic control module, often associated with engine management. The exact function depends on the machine and controller.
Do you sell Komatsu ECU units?
Yes. Yellow Plant Parts Online can source Komatsu ECU, ECM and other electronic control modules depending on availability.
Do you supply Komatsu PC200 ECU?
Yes. We can investigate PC200 ECU, PC200 ECM, PC200-7 ECU, PC200-8 ECU and related controller requirements.
Do you supply Komatsu PC210 ECU?
Yes. We can source controllers for selected PC210 configurations.
Do you supply Komatsu PC220 ECU?
Yes. We can investigate PC220 ECU and ECM requirements, including different model generations.
Can you supply a Komatsu PC300 ECU?
Yes. We can investigate ECU and ECM controllers for PC300 and related excavator models.
Can you supply Komatsu wheel loader ECMs?
Yes. We can investigate controllers for WA-series wheel loaders including WA320, WA380, WA430, WA470 and other models.
Can you supply Komatsu dozer ECUs?
Yes. We can source controllers for selected D-series bulldozers including D51, D61, D65, D85, D155 and larger machines.
Do you sell used Komatsu ECMs?
Used and tested controllers can be sourced for selected applications, subject to availability.
Can you source discontinued Komatsu ECUs?
Yes. We can investigate hard-to-find, obsolete and discontinued controllers through specialist sourcing channels.
Can you identify my Komatsu ECU from a photograph?
In many cases, yes. Send a clear photograph of the controller label, connectors, machine serial plate and any visible numbers.
Does a replacement Komatsu ECU need programming?
It depends on the machine, controller and application. Some replacement controllers may require programming, configuration, calibration or other procedures.
How do I know which Komatsu ECM I need?
The safest approach is to provide the machine model, serial number/PIN, engine details and all numbers printed on the existing controller.
Can you supply Komatsu ECU parts in South Africa?
Yes. We assist customers throughout South Africa with sourcing Komatsu ECU, ECM and electronic controller requirements.
Do you supply Komatsu ECUs outside South Africa?
Yes. We can investigate supply and shipping options for customers across Southern Africa and other African markets.
Request a Komatsu ECU / ECM Quote
Need a Komatsu ECU, ECM, engine controller or electronic module?
Send us the details below:
Machine: Komatsu
Model: PC200 / PC210 / PC220 / PC300 / etc.
Serial/PIN:
Engine Model:
ECU/ECM Part Number:
Controller Number:
Quantity:
New / Used / OEM / Aftermarket:
Delivery Location:
Photos:
Need Help Identifying Your Komatsu Controller?
Send us a photo of the ECU/ECM label and your machine serial number.
Yellow Plant Parts Online can investigate the correct sourcing option for your application.
Komatsu ECU | Komatsu ECM | Komatsu Controller | PC200 ECU | PC210 ECU | PC220 ECU | Komatsu Excavator ECU
Yellow Plant Parts Online — Keeping Machines Moving.